Smart Vella

How To Fix A Broken Hinge On A Laptop?

Have you ever had your laptop hinge break? It’s a pretty common problem, but don’t worry, we’re here to help. In this guide, we’ll show you how to fix a broken hinge on a laptop. We’ll walk you through the process step-by-step so that you can have your laptop up and running again in no time.

We know that having a broken laptop is incredibly frustrating. That’s why we want to make the repair process as easy as possible for you. With our simple guide, you’ll be able to fix your laptop without any trouble.

Steps

1. Assess the damage to your laptop’s hinge. If there is a visible crack or break, you will need to replace the hinge. However, if the damage is less severe, you may be able to fix it with some basic repairs.

2. Clean the area around the damaged hinge with a soft cloth and mild soap. This will help to remove any dirt or debris that could potentially worsen the damage.

3. Apply a layer of superglue to the broken hinge. Be sure to avoid getting any glue on the surrounding areas, as this can cause further damage.

4. Allow the glue to dry for several hours before moving on to the next step.

5. Use a small piece of duct tape to secure the broken hinge in place.

6. Check the repair to make sure it is secure before using your laptop again. If the hinge feels loose or unstable, you may need to replace it instead.

What To Do If Your Laptop Hinge Is Broken?

If your laptop’s hinge is broken, there are a few things you can do to try to fix it.

First, try adjusting the tension on the hinge. This can be done by loosening or tightening the screws that hold the hinge in place.

If this doesn’t work, you may need to replace the hinge entirely. This is a more difficult repair and will require you to disassemble your laptop.

If you’re not comfortable doing this, you can take it to a computer repair shop. They should be able to fix it for you.

The Tools You’ll Need To Fix The Hinge:

  • A small Phillips head screwdriver
  • A medium-sized flat head screwdriver
  • A hammer
  • A putty knife
  • Some super glue
  • A clothespin

Instructions: How To Fix A Broken Hinge On A Laptop

1. Start by removing the screws from the back of your laptop with the Phillips head screwdriver. There should be four screws in total, two on each side of the hinge.

2. Once the screws are removed, you should be able to gently pry the back panel off of the laptop. Be careful not to damage any of the other components as you do this.

3. Take a look at the hinge to see how it is attached to the rest of the laptop. In most cases, there will be two screws holding it in place. Use the medium-sized flat head screwdriver to remove these screws.

4. With the screws removed, you should be able to gently pull the hinge away from the laptop. If it is stuck, you can try using the putty knife to pry it loose.

5. Once the hinge is free, you can start working on repairing it. First, use the hammer to straighten out any bent parts. Then, use the super glue to reattach any pieces that have come loose. Be sure to hold the pieces in place for a few minutes while the glue dries.

6. Finally, use the clothespin to clamp the hinge closed while the glue dries completely. Once the glue is dry, you can reattach the back panel of the laptop and screw it into place.

How To Fix The Hinge?

If the broken hinge is caused by a physical issue, then it can be fairly easy to fix. Simply use a Phillips head screwdriver to remove the screws that are holding the hinge in place. Once the screws are removed, you will need to replace the broken hinge with a new one.

If the issue is caused by a software issue, then it may be a bit more difficult to fix. In this case, you will need to reinstall the software that is causing the issue. This can be done by going to the control panel and selecting “Add or Remove Programs.” From here, you will need to find the program that is causing the issue and uninstall it. Once the program is uninstalled, you should be able to reinstall it without any issues.

Tips

  • Be careful when opening and closing your laptop. Avoid slamming it shut or forcing it open too far.
  • Use a laptop stand or cooling pad to help keep your laptop working at peak performance and avoid overheating.
  • Clean the hinges on your laptop regularly with a soft, dry cloth to prevent dust and dirt from accumulating.

Conclusion

That’s how to fix a broken hinge on a laptop. It sounds daunting, but if you take it step by step it’s not too difficult. I hope this article was helpful and that your laptop is now good as new.

FQAs

Q 1. What is a broken hinge on a laptop?

A. A broken hinge on a laptop is when the screen can no longer be held up by the hinges. This can be caused by various things such as age, wear, and tear, or an accidental drop.

Q 2. How do I fix a broken hinge on my laptop?

A. There are a few ways that you can try to fix a broken hinge on your laptop.

1. Try tightening the screws that hold the hinges in place. If they are loose, this could be causing the problem.

2. If the screws are tight but the hinges still seem loose, you can try adding some reinforcements. This can be done by placing a piece of tape or cardboard under the hinge.

3. If the hinges are completely broken, you may need to replace them. This is a more difficult repair and will require you to purchase new hinges.