A stripped screw can be a real hassle to remove, but with the right tools and techniques, it can be done. In this guide, we will walk you through the process of removing a stripped screw from a laptop. Here’s about how to get stripped screw out of laptop.
The first step is to gather your tools. You will need a Phillips head screwdriver, a flathead screwdriver, and a drill. If you do not have a drill, you can use a power drill or a hand drill. The next step is to find the right bit for your drill. The bit needs to be slightly smaller than the stripped screw.
If you are not sure which bit to use, you can always ask someone at your local hardware store. Once you have the right bit, the next step is to drill into the screw. Make sure you are careful not to drill too deep and damage the surrounding material.
Once you have drilled into the screw, use the Phillips head screwdriver to remove it. If the screw is still stuck, use the flathead screwdriver to try and pry it loose. If all else fails, you can always try using a wrench or pliers to remove the screw. Be careful not to damage the surrounding material while doing so.
That’s how you remove a stripped screw from a laptop! If you follow these steps, you should be able to get the screw out without any trouble. If you are still having trouble, don’t hesitate to ask for help. There are plenty of people who can help you get the job done.
Table of Contents
How To Get Stripped Screw Out Of Laptop?
There are a few ways to get a stripped screw out of a laptop. One is to use a drill bit or a power drill. Another is to use a screw extractor. A third is to use heat.
If you are using a drill bit or power drill, first try using a smaller bit size. If that doesn’t work, then try using a larger bit size. Drill into the center of the screw until the bit breaks through the other side. Use pliers to remove the screw.
If you are using a screw extractor, first try using the smallest extractor size. If that doesn’t work, then try using the largest extractor size. Screw the extractor into the center of the screw until the extractor breaks through the other side. Use pliers to remove the screw.
If you are using heat, first try using a lighter. If that doesn’t work, then try using a soldering iron. Hold the lighter or soldering iron near the screw until it becomes hot enough to loosen. Use pliers to remove the screw.
Whichever method you choose, be careful not to damage the laptop.
Take Apart The Laptop
The first step is to take the laptop apart. This will allow you to have a better view of the screw and access to it. Be sure to refer to your laptop’s manual for instructions on how to do this.
Remove The Screw
Once you have the laptop taken apart, locate the screw that needs to be removed and use a screwdriver to do so. Be careful not to strip the screw in the process. If it feels like the screwdriver is slipping, try using some tape around the tip of the screwdriver to provide more grip.
Replace or Fix Stripped Screw
If the screw has been stripped, there are a few options for fixing it. One is to try using a power drill with a small drill bit. If that doesn’t work, you may need to get a new screw. Be sure to refer to your laptop’s manual for the size and type of screw that is needed.
There you have it! By following these simple steps, you can remove a stripped screw from your laptop.
Use A Drill To Remove The Screw
If the screw is stripped and you don’t have a screwdriver that can fit it, your best bet is to use a drill. Drill a hole in the center of the screw and then use a screwdriver or extractor to remove it.
If you’re not comfortable using a drill, you can also try using a hammer and chisel. First, drill a hole into the center of the screw. Then, place the chisel into the hole and hit it with a hammer. This will help break the screw loose.
Put The Laptop Back Together
Once the screw is out, you can put the laptop back together. Just follow these simple steps:
1. Put the laptop base back on the keyboard. Make sure to line up the screws and bolt holes.
2. Insert the screws in each hole and tighten them until they are snug. Do not over-tighten the screws or you may damage the laptop.
3. Reattach the battery and plug in the power cord.
4. Turn on the laptop and test it out.
If The Screw Is Stripped, There Are A Few Ways To Get It Out:
1. Use a drill with a screw extractor bit to remove the screw.
2. Use a pair of pliers to grip the screw and remove it that way.
3. Use a hacksaw to cut the screw off.
4. Take the laptop to a professional to have them remove the screw.
If you are not comfortable taking apart your laptop, or if the screw is too damaged to remove, you can take it to a professional to have them remove it for you.
Conclusion
So, there you have it! A step-by-step guide on how to remove a stripped screw from your laptop. If you follow these instructions carefully, you should be able to get the job done without too much trouble. However, if all of this sounds like too much work or if you’re having trouble removing the screw, don’t hesitate to reach out for help.
There are plenty of professionals who can assist with this type of repair, so please don’t try to fix it yourself if you’re not confident in your abilities. Thanks for reading and we hope that this article was helpful.
