If your HP laptop’s battery is no longer holding a charge, it’s time to replace it. This guide will show you how to replace battery in hp laptop.
Be sure to back up your data before you begin, as this process will erase everything on your hard drive. You will also need a Phillips head screwdriver and a plastic prying tool. Let’s get started!
Steps
1. First, shut down your HP laptop and unplug the power cord.
2. Next, remove the battery latch (usually located on the bottom of the laptop) and then remove the battery itself.
3. With the battery removed, locate the screws that hold the hard drive in place and remove them.
4. Carefully remove the hard drive from its housing and set it aside.
5. Now you will need to remove the keyboard bezel—the plastic trim around the keyboard. There are usually several Phillips head screws holding this in place, so remove those and then carefully pry up the bezel with your plastic prying tool. Be careful not to break it!
6. With the bezel removed, you should now see the keyboard itself. There are usually two screws holding it in place, so remove those and then carefully lift the keyboard up and out of the laptop.
7. Now you should see the battery connector. Using your plastic prying tool, carefully disconnect the battery connector from the motherboard.
8. With the old battery disconnected, you can now install the new one. Simply connect the new battery in the same spot as the old one and then screw it in place.
9. Reassemble your HP laptop in the reverse order of disassembly and then power it on to test that everything is working properly.
Related Blog: How To Make Power Bank From Laptop Battery?
What Type Of Battery Is In Your HP Laptop And Where Can You Find It?
Most HP laptops use lithium-ion batteries, which are small and lightweight. You can usually find the battery on the bottom of the laptop, underneath the keyboard, or on the side.
How To Replace Battery In HP Laptop?
- First, you will need to shut down your laptop and unplug it from any power source.
- Next, locate the battery cover on the bottom of your laptop. Once you have found the cover, use a Phillips head screwdriver to remove the screws that are holding it in place.
- After the cover has been removed, you should see the battery inside. Using a flathead screwdriver, carefully pry the battery out of its compartment. Be careful not to damage the surrounding area as you do this.
- Now that the old battery has been removed, it’s time to install the new one. Place the new battery in the compartment and use the flathead screwdriver to gently push it into place. Once the new battery is in, replace the battery cover and screw it back into place.
- Finally, plug your laptop back in and turn it on. You should now have a working laptop with a new battery!
How To Install A New Battery In Your HP Laptop?
If your HP laptop is not holding a charge like it used to, or if the battery life has diminished significantly, it might be time to replace the battery. Replacing the battery in an HP laptop is not difficult, and can be done in just a few minutes with a few simple tools.
What You’ll Need:
- A new HP laptop battery
- A Phillips head screwdriver
- A flat head screwdriver (optional)
Instructions
1. Shut down your HP laptop and unplug it from any power source. Remove any external devices, such as a USB drive or an external mouse.
2. Flip over your laptop so that the bottom is facing up. Locate the battery release latch on the bottom of the laptop. This will usually be a small switch or button.
3. Use your thumb or finger to push the release latch away from the battery compartment. At the same time, use your other hand to slide the battery out of its compartment.
4. Take your new HP laptop battery and insert it into the battery compartment, making sure that it is properly seated and locked in place.
5. Close up the bottom of your laptop and plug it back into a power source. Boot up your laptop and test out the new battery to make sure it is working properly.
Related Blog: How To Replace Laptop Graphics Card?
Tips For Extending The Life Of Your HP Laptop Battery
1. Use power-saving features.
2. Reduce screen brightness.
3. Minimize processor speed.
4. Adjust display timeout and sleep settings.
5. Use hibernation mode instead of standby mode when you know you won’t be using your laptop for an extended period of time.
Conclusion
Replacing the battery in an HP laptop is a fairly simple process that can be done at home with a few basic tools. In this article, we’ve outlined the steps you need to take to replace your battery and give some tips on how to replace battery in HP laptop. Have any questions about replacing your battery? Let us know in the comments below!
FAQs
Q 1. Can I replace the battery in my laptop myself?
A. It is possible to replace the battery in your laptop yourself, but we recommend that you take it to a professional for help. The process can be tricky and if not done correctly, could damage your computer.
Q 2. How can I replace the non-removable battery in the HP laptop?
A. It is possible to replace the battery in your laptop yourself, but we recommend that you take it to a professional for help. The process can be tricky and if not done correctly, could damage your computer.
Q 3. How many years does an HP laptop battery last?
A. HP laptop batteries typically last between 2 and 5 years. However, this can vary depending on how often you use your laptop and how well you take care of the battery.
